SINO VEHICLE & EQUIPMENT COMPANY LTD
Create more value and wealth through our quality products and professional solutions.
Add to Cart
35-Ton 42m Boom Length Truck Crane CVXCT35 Heavy Construction Machinery
1. The lifting performance is fully ahead of the industry's 35-ton products. The boom length is increased to 42m, and the lifting performance is increased by about 20%, fully covering the competition
Hand 10%;
2. The low-speed and high-torque power system realizes the perfect combination of optimal power and optimal economy. Maximum gradeability 42%, maximum travel speed
90km/h. The industry's highest; fuel consumption per 100 kilometers is 32L, which is 12% lower than industry products.
3. New energy-saving hydraulic system, lower fuel consumption and better fretting. The comprehensive operating conditions are 15% better than competitors on average, and the fretting and
Ride comfort is increased by 20% to meet users' precise hoisting needs.
4. machine-interactive system that has reached the level of car-level provides users with comfortable and intelligent operating experience.
5. G-generation brand new appearance, humanized design, user operation is more comfortable and convenient.
SPECIFICATION:
| PROJUCT | UNIT | PARAMETER |
| Parameter item | - | CVXCT35 |
| Size parameters | ||
| Overall length | (mm) | 13065 |
| Whole width | (mm) | 2750 |
| Overall height | (mm) | 3540 |
| Wheelbase | (mm) | 1900+1350 |
| Wheelbase | (mm) | 2308/2079 |
| Weight parameters | ||
| Total mass in driving state | (kg) | 35000 |
| Axle load | (kg) | 9000+13000×2 |
| Dynamic parameters | ||
| engine model | - | SC9DF290.1Q4/D10.31-40 |
| Engine rated power | (kw/(r/min)) | 213/1900 228/1900 |
| Engine rated torque | (N.m/(r/min)) | 1400/1400 1390/(1200-1500) |
| Driving parameters | ||
| Driving | ||
| Driving speed | (km/h) | 90 |
| Minimum stable driving speed | (km/h) | 2.5～3 |
| Turn | ||
| Minimum turning diameter | (m) | 22 |
| Minimum turning diameter of arm head | (m) | 28.4 |
| Maximum grade | (％) | 42 |
| Minimum ground clearance | (mm) | 260 |
| Approach angle | (°) | 19(18)/12 |
| Departure angle | (°) | 13.5 |
| Braking distance | (m) | ≤36.7(60km/h) |
| Fuel consumption per hundred kilometers | (L) | 32 |
| Main performance parameters | ||
| Maximum rated total lifting capacity | (t) | 35 |
| Minimum rated range | (m) | 3 |
| Maximum lifting moment of basic boom | (kN·m) | 1458 |
| Turntable tail turning radius | (mm) | 3600 |
| Outrigger | ||
| Vertical | (m) | 5.975 |
| Horizontal | (m) | 7 |
| Lifting height | ||
| Base arm | (m) | 10.1 |
| The longest main arm | (m) | 41 |
| The longest main arm + deputy arm | (m) | 56.8 |
| Longest main arm + auxiliary arm + extended section | - | - |
| Boom length | ||
| Basic arm | (m) | 10.9 |
| The longest main arm | (m) | 42 |
| The longest main arm + deputy arm | - | 58 |
| Longest main arm + auxiliary arm + extended section | (m) | - |
| Working speed | ||
| Maximum turning speed | (r/min) | 2.5 |
| Lifting speed | ||
| Main lifting mechanism | - | 130 |
| Auxiliary lifting mechanism | - | 130 |
| Boom extension time | ||
| Full extension | (s) | 80 |
| Full shrink | - | 90 |
| Time of change | ||
| Full arm | (s) | 40 |
| Full arm drop | (s) | - |
| Support legs receive and release-water level | ||
| At the same time release-water level | (s) | 30 |
| At the same time, receive-water level | (s) | 20 |
| Support legs retracted-vertical | ||
| At the same time | (s) | 35 |
| At the same time | (s) | 25 |
Our Advantage:
1) Does your company a factory or trade company?
SINO HEAVY MACHINERY CO.,LTD,located in Jinan of Shan dong province ,is a branch of factory of SINOTRUK . The annual production capacity is over 20,000 units of all kinds special trucks&machinery.The SINO HEAVY MACHINERY factory is range from tractor truck,tipper truck,concrete mixer truck,fuel truck,cargo truck,crane mounted truck ,garbage truck,water truck etc.
2) What’s the qualify assurance we provided and how do we control quality?
1. Established a procedure to check products at all stages of the manufacturing process from raw materials to final products. Beside,we have also developed a procedure which identifies the inspection and test status of all items at all stages of the manufacturing process.
2. 100% inspection in assembly lines. All controls, inspections,equipment,fixtures,total production resources and skills are inspected to ensure they consistently achieve the required quality levels.
3) What’s your MOQ?
One unit is ok,dealership is utmost welcome.
4) How do you transport the trucks?
We transport the vehicle in nude ,or by roro vessel,or in wax by bulk vessel or by container if possible.
Our factory possess long -term cooperation with ship agency which can provide you lowest shipping fee.
5) Can you satisfy my special requirement?
Definitely! We are direct manufacturer and we have strong producing capacity and R&D capacity!
We have large engineering team to make customized design to utmost meet your special requirements.